Tutorial Details:
1, Download the tool and firmware here: https://drive.google.com/file/d/1drpUzcZ5MX3mR3QQamY9q10LzJPRS1CV/view?usp=sharing
Firmware for C182 (DT WATCH 10): https://drive.google.com/drive/folders/1FaeMaKk48wQJg3ePUQdW_IVsWRrGxVLY
Firmware for DT WATCH 11 PRO(D5 Version): https://drive.google.com/file/d/1-zPtncXiQIiX-kk8CA_iyunCf6dtXDf2/view?usp=sharing
Firmware for KKTICK TANK T6 Only: https://drive.google.com/file/d/1agsyLunRHSRbkGrl3BBd7Z4ivJVyq-5O/view?usp=sharing
2, Save and Extract the Files
Save the compressed package to your computer.
Extract the contents of the compressed file.
Install the Configuration Tool
3, Extract the config_tool_1.28.01_20230825 package.
Open the extracted folder and install the application.
Open the Configuration Tool
After installation, icons will appear on the computer desktop, as shown in the figure below
4, Upgrade firmware
1.Open the "Config Tool" and the "Please Select Firmware" page will pop up. Load the firmware into the tool and choose any of the following options as needed.
(1)The suffix. fw is for small packages, and specific feature local resource update packages
(2)The file with the suffix debug.fw is a large package, and the complete resource update package is available
5, Connect the watch to the computer using a data cable（Insert the USB end of the data cable into the computer, and connect the other end to the charging port at the bottom of the watch），Click on the execution file“ser_deter.adfu.exe” to successfully detect and recognize the port；
6, Select the Port in the Configuration Tool
In the Configuration Tool, find and select the port labeled `ADFU0`.
Click “Download” to proceed.
7, Download the Firmware
“Download Firmware” window will pop up in the Configuration Tool.
Wait for the download to complete.
8, Complete the Upgrade
Once the download is complete, the “Download Firmware” window in the Configuration Tool will display “DOWNLOAD FINISH！” with a green progress bar.
